Products | Paint, Resin and Coating

SURFGUARD

277

SURFGUARD is a two-component epoxy mastic coating with a polyamine. This product is designed for areas where optimum surface preparation is not possible and also provides long-term protection in highl
ISOPUR-LT

276

ISOPUR-LT paint is a two-component self-leveling elastomeric coating based on polyol and aromatic isocyanate resins. This product has a suitable curing time for implementation and due to the high soli
ISOPUR -HT

275

ISOPUR-HT is a fast-curing two-component elastomeric system that can only be applied with hot mechanical spray equipment.
ISOPUR-CR

274

ISOPUR-CR is a coating with extremely fast drying time and properties and a two-component, 100% solid coating. ISOPUR-CR can be applied by a two-component spray machine and is applied hot.
THERMO DUR

273

Polyurethane thermal insulation spray foam (closed cell foam) This spray foam contains tiny cells with solid cell walls.
SOUND DUR

272

Polyurethane Soundproofing Spray Foam - Open cell foam is a soft, flexible, spongy insulation with broken cell walls that allow air to easily move between the cell walls and fill them. It has very low
THERMOTEX-500

271

THERMOTEX-500 thermal and cold insulation is a water-based polymer that is applied coldly, it is single-component and is used as a thermal-cold insulation for all surfaces.
​
JOINTEX-200

270

JOINTEX-200 waterproofing of expansion joints is a water-based polymer, which is applied coldly, it is single-component, and it is used as a lining and waterproofing for all types surfaces in the lowe
ISOTEX-150

269

ISOTEX-150 is based on water-based acrylic copolymer that is cold applied, this product is single-component and is used as a moisture barrier for the facade and is resistant to water and moisture.
ISOTEX-110

268

ISOTEX-110 is an elastic water-based polymer that is applied coldly, it is a single-component, and it is used as a lining and waterproofing for all absorbent surfaces, and it is water-resistant.
ISOTEX-101

266

ISOTEX-101 is a water-based polymer that is applied coldly, it is a single-component and is used as a lining and waterproofing for all absorbent surfaces and is water resistant.
CEMENTEX-168

265

CEMENTEX-168 is a mixture of cement and mineral powders that does not shrink after adding water, and its volume does not change during the hardening process.
CEMENTEX-166

264

CEMENTEX-166 concrete repair and sealing mortar is a 2-component product based on polymer components, cement, and special additives.
CEMENTEX-165

263

CEMENTEX-165 is a two-component product based on polymer components, cement, and special additives.
CEMENTEX-163

262

CEMENTEX-163 is a 2-component, fast-setting waterproofing mortar based on mineral powders.
CEMENTEX-160

261

CEMENTEX-160 concrete repair mortar is a two-component mortar based on emulsion polymers, mineral powders and cement and is used to repair pools, tanks, concrete structures, etc.