Loading

Automobile Air Filter containing Polymeric Nanofibers

Introduction
The automobile air filter is used to protect the engine and prevent damage to the motor components by dust, contaminants and other harmful suspended particles in the air. The latest evolution in the filtration industry is the use of nanotechnology in this field. With this technique, the surface of large cellulosic or synthetic nanofibers (usually 10 to 30 micrometers in diameter) is covered with a layer of ultra-fine nanofibers (typically 50 to 400 nm in diameter). There are two different methods for separating particles in the filter paper structure.
In-depth filtration, in which particles are separated in different layers of paper according to their size; and surface filtration, in which all particles are separated on the surface of paper. In Behran Co. before the pleating process, the filter paper is covered with a layer of Polyamide textiles with the diameter of less than 100 nanometers by using electrospinning process. 
 
Application
  • This product is mainly used as automobile air filter

Advantage of Using Nanotechnology
Nanofibers because of having a high surface area, high length to width ratio, and low density are able to eliminate the large amounts of particles during the filtration process; this performance leads to an increase in filtration efficiency. The filtration efficiency was evaluated in accordance with EN 779. 
EN 779: Classification of particulate air filters 

Certificates and Standards
  • NanoScale Certification
 

Contact Us

  • Office address: 2nd floor, No 30, East 26th St., Azadegan Blvd, Sheikh Bahaei Avenue., Tehran, Iran
  • Tel: (+98) 21 88354398
  • Fax: (+98) 21 88359623
  • Email: info@iliahightech.com